How to Assemble a Green Soul Height Adjustable Table (Step-by-Step)
Assembling Your Green Soul Height Adjustable Table
Green Soul height adjustable tables are designed for DIY assembly, and most users complete setup in 30-45 minutes. Here is a step-by-step overview of the assembly process, plus tips to make it smooth.
Before You Start
Unbox all parts and check against the parts list in the manual. You will need a Phillips screwdriver (included with most models). Clear a floor area larger than the desk dimensions. Have a second person available for flipping the assembled frame onto the tabletop.
Step-by-Step Assembly
Step 1: Attach the Feet to the Legs
Connect the foot bars to each leg column using the provided bolts. Tighten firmly but do not over-torque — you will do a final tightening at the end.
Step 2: Connect the Frame Crossbar
Attach the horizontal crossbar between the two legs. This provides lateral stability. Adjust the crossbar width to match your tabletop width.
Step 3: Mount the Motor and Control Box
For electric models, attach the motor to the frame using the designated mounting points. Connect the motor cable to the control box. For manual models, attach the hand crank mechanism.
Step 4: Attach the Frame to the Tabletop
Place the tabletop face-down on the floor (on a soft surface to prevent scratches). Position the assembled frame on top and align the pre-drilled holes. Screw the frame into the tabletop.
Step 5: Flip and Connect
With a second person, carefully flip the desk upright. Plug in the power cable. Press the up/down buttons to test the motor. Set your memory presets.
Pro Assembly Tips
🔧 Assembly Tips from Green Soul Users
- Watch the video first: Green Soul provides model-specific assembly videos on the Assembly Videos page
- Don't fully tighten bolts: Leave them finger-tight until everything is aligned, then do a final pass
- Route cables during assembly: Thread cables through the cable organiser before flipping the desk upright
- Anti-slip pads last: Attach the anti-slip pads to the feet after the desk is in its final position
- Reset the motor: If the motor doesn't respond after assembly, unplug for 10 seconds and replug. Hold the down button for 5 seconds to reset.
Free Installation Available
Green Soul offers free installation in select pin codes. The installation team contacts you within 3 days of delivery to schedule a convenient time. Check availability on your product page. If you prefer DIY but get stuck, Green Soul's support team is available via WhatsApp for real-time guidance.
Have questions? Contact Green Soul support. Need to register your warranty? Visit the warranty registration page.
Frequently Asked Questions
Q: How long does assembly take?
A: 30-45 minutes for most models. The Oasis L-Shape may take up to 60 minutes due to the two-piece top.
Q: Do I need any tools not included in the box?
A: Most models include all necessary tools. A power drill can speed up screwing but is not required.
Q: Can I assemble it alone?
A: Most steps can be done alone, but flipping the assembled frame onto the tabletop is much easier with two people.
Q: What if a part is missing or damaged?
A: Contact Green Soul support immediately via WhatsApp or email at info@greensoul.online. Replacement parts are shipped quickly.
Browse all height adjustable tables
Shop Green Soul Standing Desks →